Re Upload Print Profile

What is it?

Reuploading a print profile is exactly what it sounds like. You can overwrite an entire print profile by reuploading it. This overwrites the original 3mf file that was used to create the print profile.

Technically you can upload any 3mf and have it overwrite the existing one. It is up to you to be sure they are similar enough. Or if you want to change it completely you can. Its up to you.

There is no undo for this action. If you upload the wrong 3mf you cannot revert back and continue with an older version.

What's it for?

This is ideal if you want to make a change to a profile and maintain the history.

For example: Say you have done a Baseline calibration and you want to change the default bed temperature. You can download the print profile, open it in Prusa Slicer, change the bed temperature, then reupload it and all future calibrations and downloads will use the updated bed temperature and 3mf file.

How to use it

Reuploading can only be used between calibration modules. If a calibration module is in progress you must complete it first.

1) Click on a print profile that you would like to reupload a 3mf for

2) You should see a button in the middle of the screen called "Reupload 3mf". If you dont see this then you have a calibration in progress.

3) Select a 3mf file to overwrite the current one with

Now when you do another calibration it will use that 3mf, not the one before it.